Mus Agro: Your reliable farm equipment supplier!

1 Massive and professional disk chains feeding equipment factory

2022-04-23

Disk chains feeding equipment production procedure

Disk chain feeding steel chains bending and welding

Hi Manganese steel wires are cut and bending and welding together with chains by the machine firstly, then finished chains process heat treatment to meet the pulling strength requirement

60 disk chain feeding chains specification is as below:

Chain ring: φ5 round steel, weight: 15.2g; plus cross brace 2mm*25mm, weight: 1.5g

Chain ring inner width 9mm±0.5, inner length 35mm±0.5, outer width 19mm±0.5; the chain is galvanized as a whole

The thickness of the galvanized layer is 8μm; the deformation tensile force is 2T, and the breaking force is 3T;

102 disk chain feeding chains specification is as below:

Chain ring: 20Mn2, φ7 round steel, weight: 368g; plus cross brace φ4mm*40mm, weight: 36g

Chain ring inner width 12mm±0.5, inner length 46mm±0.5, outer width 26mm±0.5

Cold galvanized Process, the thickness of the galvanized layer is ≥8μm

The deformation tensile force is ≥3T; the breaking force is ≥5T

160 disk chain feeding chains specification is as below:

Chain ring: 20Mn2, φ11 round steel; injection-molded plug link and cross brace φ6mm*60mm

Chain ring inner width 19mm±0.5, inner length 72mm±0.5, wire diameter 11mm±0.1

Cold galvanized process, the thickness of zinc layer is ≥8μm; the yield tension of the chain is >75KN, and the breaking tension is >100KN

Disk chain feeding chains after Nylon injection

60 disk chain feeding chains specification is as below

Nylon disk: diameter 45mm (molding shrinkage rate 1.5-2.2%, 44mm qualified), spacing 70mm±0.5;

Weight : 13.9g, nylon 66 material (reinforced, toughened, wear-resistant) ,no burr after injection molding of the plug;

Conveying distance 300 meters, 10-12 corner wheels, 45° gradient and 90° vertical lift

Feeding capacity ≥1.2T/h, service life is more than 20 years

102 disk chain feeding chains specification is as below

Nylon disk: diameter 75mm±0.1, spacing 92mm±0.1; disk plate thickness: edge 9mm±0.1, arc-shaped

Weight : 55g, nylon 66 material (reinforced, toughened, wear-resistant) ,no burr after injection molding of the plug;

Conveying distance 400 meters (straight line distance 200 meters), 4 corner wheels, climbing slope ≤45°

Feeding capacity≥ 5T/h; service life of more than 20 years

160 disk chain feeding chains specification is as below

Nylon disk: diameter 130mm±0.1, spacing 144mm±0.5; disk plate thickness: edge 10.9mm±0.1, arc-shaped

Nylon 66 material (reinforced, toughened, wear-resistant) ,no burr after injection molding of the plug;

Conveying distance 360 meters (straight line distance 180 meters), 4 corner wheels, climbing slope ≤45°

Feeding capacity≥ 15T/h; service life of more than 20 years

Never let client down Value creating:Benefit client first,then benefit yourself Fast moving: Be efficient every specific work and obligation

Get in Touch





    [_url]