Farm sanitation construction

1 year ago

arm hygiene and road precautions. Under normal circumstances, the determination of the bathroom space shall be based on the site area, the size of the farm, the use and nature of the building, and the characteristics of the epidemic prevention facilities.

Farm sanitation construction

arm hygiene and road precautions. Under normal circumstances, the determination of the bathroom space shall be based on the site area, the size of the farm, the use and nature of the building, and the characteristics of the epidemic prevention facilities.

Generally speaking, in the range of 10 to 500 meters, the larger the toilet spacing between farm buildings is, the better, but in view of the limitations of land resources, in the premise of meeting the health needs of epidemic prevention, China's pig farm uses the best bathroom distance According to the following recommended values: 10 to 15 meters in the same kind of pig house, 15 to 20 meters in different kinds of pig houses, 200 to 300 meters away from the pig house in the epidemic prevention isolation area, and 50 to 100 meters away from the pig house in the storage area.

In addition, planting flowers, trees, vegetables, etc. between buildings can reduce the above-mentioned spacing and obtain certain environmental and economic benefits.

The hygienic requirements for pig farm road design require that pig farm roads should be as blind and short as possible in order to ensure that the production links are convenient. In addition, the following three requirements should also be met:

1.Net and dirty roads should be separated

Net roads are roads that carry clean items such as feed, pig products, and production materials. Dirty roads are roads that carry dirt such as excrement, dirt, and diseased pigs. These two types of roads must not cross each other.

Otherwise, they are unfavorable for health and disease prevention.

2.The road should be solid

Well drained, not too smooth, slope to the side is about 10%.

3.The main road must ensure that the vehicles will be able to meet

Therefore, the width of the road surface should reach 5.5~6.5 meters. The general branch road should be 2~3.5 meters wide. However, at the end of the branch road, a reversing field should be designed so that vehicles do not have to enter other roads and the road can be smoothly circulated, avoiding net roads and dirt. The cross of the road.

Back to overview