The most profitable scale pig farm construction guide

1 year ago

1.The principle of address selection. The terrain requires openness and neatness, and has sufficient area...

The most profitable scale pig farm construction guide

1.The principle of address selection

The terrain requires openness and neatness, and has sufficient area. The area of the production area for self-reproduction and self-recovery pigs can generally be considered as 45 to 50 square meters for each breeding sow or 3 to 4 square meters for listed finishing pigs.

The living area and administrative area are considered separately. And there is room for development; local areas must be adequate, and the construction of pig farms accounts for more than half of the reasons for the profitability of pig farms;

2.Choose a wide place

  1. The terrain is dry, flat and sunny, facing south and southeast by 15 degrees, which is conducive to drainage, lighting, cold, warm winter and cool in summer. Note: This determines the humidity of the farm, lighting is very important; light is good, the terrain is flat.
  2. Soil quality requires good drainage, strong air permeability, no spring in spring, and even texture and pressure resistant sandy soil.
  3. Adequate water and electricity: Water quality meets drinking water standards, access to convenient groundwater, and a fully-powered three-phase power supply.
  4. Convenient transportation: convenient transportation of feed, fertilizer and population. However, pig farms should be far away from traffic trunks and villages. Markets, slaughterhouses, meat processing, etc. are more than 3 kilometers away from unfavorable sites for epidemic prevention.

3.Daily population structure of pigs

  1. Boar 300×1/25=12 heads
  2. Empty sows number = number of sows × annual parity × number of breeding days / 365 = 300 × 2.2 × (14 + 21) / 365 = about 65 heads
  3. number of pregnant sows = number of sows × annual parity × number of breeding days / 365 = 300 × 2.2 × (114-21-7) / 365 = about 160 heads
  4. Nursing sows number of sows = number of sows × annual parity × number of breeding days / 365 = 300 × 2.2 × (7 + 28) / 365 = about 65 heads
  5. number of suckling piglets = number of sows × annual parity × number of born babies × number of breeding days / 365 = 300 × 2.2 × 10 × 0.95 × 28/365 = about 510 heads
  6. Number of nursery pigs = number of sows × number of births × number of live births × survival rate × number of days of breeding / 365 = 300 × 2.2 × 10 × × 0.95 × 28/365 = about 485 heads
  7. Number of finishing pigs = number of pigs × number of births × number of births of babies × survival rate × days of breeding / 365 = 300 × 2.2 × 10 × 120 / 365 = about 2000 heads

4.Light, density, height of the pighouse must be well controlled

Light, density, height of the pighouse must be well controlled

  • Monthly slaughter of commodity pig = 300 × 2.2 × 10 × 0.95 × 0.98 × 120/365 = approximately 2000 heads
  • Total storage = 300 + 12 + 510 + 585 + 2000 = 3300 heads

5.Equipment and Facilities Configuration

  1. The main equipment and facilities of the new process pig raising include: unit limit bar, production bed, conservation high bed and other complete sets of equipment
  2. Limit column 165+10 sets about 300 yuan each
  3. Sow delivery bed 65+10 sets about 2400 yuan each
  4. Piglet nursery high bed 25+5 sets about 1000 yuan each
  5. Automatic chute 20 (care) +84 (big pig)

6.Civil budget

  1. 1 bar room (16 columns) (9.5 x 25) = 250m²
  2. Empty workshop (open two-row type) 1 (7.2×50) = 360m²
  3. 175 sets of gestation limit column 1 (7.4×5.5)=407m² unit limit column specification 2.2×0,6×1.1
  4. Production workshop (double row enclosed type) (10.5×85) = 895m² divided into 5 rooms, each 17 meters long, each with 16 production beds, all in and out
  5. One-to-one correspondence between nursery and delivery room: 17 x 10.5 x 5 rooms = 893m²
  6. Finishing workshop: 6 rooms, each with an area of 50 meters long × 8 meters wide × 6 rooms = 2400m²

Back to overview