Hi Manganese steel wires are cut and bending and welding together with chains by the machine firstly, then finished chains process heat treatment to meet the pulling strength requirement
Chain ring: φ5 round steel, weight: 15.2g; plus cross brace 2mm*25mm, weight: 1.5g
Chain ring inner width 9mm±0.5, inner length 35mm±0.5, outer width 19mm±0.5; the chain is galvanized as a whole
The thickness of the galvanized layer is 8μm; the deformation tensile force is 2T, and the breaking force is 3T;
Chain ring: 20Mn2, φ7 round steel, weight: 368g; plus cross brace φ4mm*40mm, weight: 36g
Chain ring inner width 12mm±0.5, inner length 46mm±0.5, outer width 26mm±0.5
Cold galvanized Process, the thickness of the galvanized layer is ≥8μm
The deformation tensile force is ≥3T; the breaking force is ≥5T
Chain ring: 20Mn2, φ11 round steel; injection-molded plug link and cross brace φ6mm*60mm
Chain ring inner width 19mm±0.5, inner length 72mm±0.5, wire diameter 11mm±0.1
Cold galvanized process, the thickness of zinc layer is ≥8μm; the yield tension of the chain is >75KN, and the breaking tension is >100KN
Nylon disk: diameter 45mm (molding shrinkage rate 1.5-2.2%, 44mm qualified), spacing 70mm±0.5;
Weight : 13.9g, nylon 66 material (reinforced, toughened, wear-resistant) ,no burr after injection molding of the plug;
Conveying distance 300 meters, 10-12 corner wheels, 45° gradient and 90° vertical lift
Feeding capacity ≥1.2T/h, service life is more than 20 years
Nylon disk: diameter 75mm±0.1, spacing 92mm±0.1; disk plate thickness: edge 9mm±0.1, arc-shaped
Weight : 55g, nylon 66 material (reinforced, toughened, wear-resistant) ,no burr after injection molding of the plug;
Conveying distance 400 meters (straight line distance 200 meters), 4 corner wheels, climbing slope ≤45°
Feeding capacity≥ 5T/h; service life of more than 20 years
Nylon disk: diameter 130mm±0.1, spacing 144mm±0.5; disk plate thickness: edge 10.9mm±0.1, arc-shaped
Nylon 66 material (reinforced, toughened, wear-resistant) ,no burr after injection molding of the plug;
Conveying distance 360 meters (straight line distance 180 meters), 4 corner wheels, climbing slope ≤45°
Feeding capacity≥ 15T/h; service life of more than 20 years