Mus Agro: Your reliable farm equipment supplier!
008618503860553
Zhengzhou Mus Agro Tech Co., Ltd is located in Zhengzhou City, center place of People’s Republic of China, which is one professional pig equipment manufacturer from China.
Mus Agro’s mission is to provide green and high efficient pig farming equipment and solution for the farm owners in different regions and places in the world.
To accomplish this missions, Mus Agro has complete team of R&D engineers,project engineers, and commissioning engineers, to service oversea clients in Asia, Europe, America, middle east, as while as Africa, hundreds of sound project feedback innovated us to keep moving in the road of our mission!
Mus Agro owns 3 pig equipment manufacturer production bases, full equipped with automatic production line for the pig crates and penning,automated feeding equipment,ventilating equipment, chicken cages system, and manure collecting and processing system, which is to meet the high demanding control of equipment accuracy and quality.
Pig crates and penning includes different types farrowing crates,gestation crates, nursery penning,finishing penning, boar and gilt penning,all steels are hot dip galvanized process
Automated feeding system includes barn silos,dick chains, disk chain driving unit,corner wheels, transfer hoppers,flex auger drive unit,feed boots and so on
The first step of pig crate fabricating is the cutting process, the steel pipes, bars, and plate will be cut into different sizes and shapes according the drawing, like farrowing crates frame, footing plate, PVC pen supporter, and so on
Then the cut steel pipes, bars, plates will be drilled firstly, and bent in the automatic bending machine with pre-designed molding, the pig crates footing will be pouched with accurate installation size holes, till now all steel materials are all semi-finished parts
After all steel materials well prepared, pig crates will be welded in the robot welding station, like farrowing cage and gestation crates side crates, front and rear doors, tri bar slat floors and so on.
The welding process is the very key step in the whole fabricating process, the welding quality shall be guaranteed and no missing welding spots, which can ensure the service life of the pig stalls
The last step of the pig crates fabricating is the hot dip galvanizing treatment, since the hogs swages can generate lots strong corrosive gas, which will rust the steels inside the pig house, so the pigs crates surfaces shall be well treated for the strong corrosive gas.
Hot dip galvanizing is the ideal anti-corrosive treatment for the pigs crates, the welded crates will be cleaned by the acid, and then drop into the melted zinc tank, the crates surface will form one zinc layer, which is about 86um, and can last over 15 years without rusting
Mus Agro factory has a very big production ability for the different pig crates, and in our warehouse, there are sufficient stocks of different pig crates for sale, like pig farrowing crates pig stall,nursery pen and so on, all sow crates delivery time is short, price is special.
You can contact us for more information by [email protected]
Before gestation crates production: raw steel materials sizes and tolerance must meet the requirement of confirmed technical drawing
Before galvanizing gestation crates: welded crates sizes and tolerance must meet the requirement of confirmed technical drawing
pig crates manufacturer
Welded parts shall be welded firmly and reliably, and there shall be no false welding, false welding and burns.
After welding, the welding slag, weld flash, spatter and other debris on the surface of the welding slags shall be removed.
There should be no cracks on the surface of the weld and heat affected zone, and the weld should not have defects such as incomplete penetration and inclusions.
There shall be no leakage plating with a single area of more than 1 cm² on the surface of the hot-dip galvanized rail, and no more than three leakage plating spots with a single area of less than 1 cm²; there shall be no peeling or peeling.
The thickness of the zinc layer shall not be less than 85μm.
There should be no cracks, wrinkles, blistering and other phenomena on the bending surface of the steel pipe.
The surface of the steel pipe should be flat and smooth, and there should be no obvious rough spots, raised parts, sharp edges and burrs that could harm pigs and operators.
